Procedure for Printing E-Mail Messages in Pine

Open the message in Pine as usual.

Press the letter % (print) and you should see a message at the bottom of the screen that says:

Print Message XX using "attached-to-ansi-no-formfeed"

Press the Enter/Return key and the message should print directly to your printer, provided it is turned on and is on-line. The XX will be the message number that you want printed.

Note: If the message "attached-to-ansi" comes up a blank page will be output after each printout. Go to the Pine Setup and change the Printer configuration to "attached-to-ansi-no-formfeed".

If you have comments, suggestions or concerns, please contact the CCNA Helpdesk

Last revised: Set. 2, 2000